Frigidaire Refrigerator Not Cooling (How To Fix) 

One of the most common refrigerator problems faced by homeowners is the lack of cooling. 

Most refrigerators that are past their prime are known to have a somewhat diminished cooling. But, if a fridge suddenly stops cooling entirely, it can create panic among homeowners. 

As the temperature of the fridge rises, there’s always a chance of the food items going bad. So, most people resort to calling a technician, which can often be quite expensive if a fridge isn’t under warranty. That’s why we thought of researching how you can fix a fridge that isn’t cooling by yourself. 

In this guide, we are going to talk about ways to fix the cooling of refrigerators from Frigidaire, a well-loved home appliance brand. We have also tried to include information about how to maintain proper cooling in the fridges. 

So, without further ado, let’s get started!

How To Fix A Frigidaire Fridge That Has Stopped Cooling After A Power Outage? 

One of the common complaints of a Frigidaire refrigerator failing to cool is when there has recently been a power outage. The sudden surge of electricity may put pressure on the compressor of your fridge, so that’s the first part you’ll need to check. 

You should look for a slight humming sound, and if it isn’t there, move to the main control board to inspect the start relay. A faulty start relay will fail to send power back to the compressor leading to your fridge failing to cool down. Use a multimeter to check for a reading of 120V AC. If it doesn’t, then you must change the part as soon as possible. 

In some cases, the compressor may work just fine, so the next part to check would be the condenser fan. The blades of the fan should be moving without stopping or interruptions, and if they aren’t moving at all, then the motor might have been damaged. 

You’ll need to replace the fan motor so that it’s able to save the compressor from overheating, which in turn affects the cooling of your fridge. Changing the motor is pretty easy, as all you need to do is take it off from the fan housing by removing some screws. Always make sure to check whether the fan is spinning properly before wrapping up your work. 

Solutions For A Frigidaire Refrigerator That’s Beeping And Not Cooling

Is your Frigidaire refrigerator constantly making a beeping noise and failing to cool down? It might be due to the fridge door not being closed properly. When we accidentally leave the fridge door open, the appliance fails to regulate its temperature leading to a reduction in cooling. 

To solve this problem, the smart sensors of Frigidaire refrigerators have been programmed to give out an alarm when the door is left open. You may even see a door ajar icon on the control panel in such situations. All you need to do is close the door, and the beeping should stop. 

However, it may take a couple of hours for the refrigerator compartment to cool down properly and get back to the optimal temperatures. If the beeping doesn’t stop, just press the alarm reset button present on the display of your fridge. In case you have a fridge that lacks a display, unplug it for 30 seconds and replug it to stop the beeping. 

The fridge may also give out a beeping alarm if the temperatures of the compartments rise drastically. In such situations, turn off the alarm by pressing the alarm reset button. Then, move on to check the parts to find any faults that might be stopping the fridge from cooling down properly. 

In some cases, the beeping may fail to stop, and this might be caused by loose gaskets. If you think the gaskets are the problem, get them changed by an appliance repair technician, and your fridge should cool adequately, just like before. 

Parts To Check When Your Frigidaire Refrigerator Is Not Cooling 

1. Condenser Fan Motor 

If your refrigerator is facing a problem in cooling down, one of the first parts to check would be the condenser fan. Check whether something is stopping the blades from spinning properly, which may restrict cooling. If the fan isn’t moving, inspect the motor to see if it has continuity. 

In case there’s no clear reading or response, you’ll need to replace the motor. The condenser fan is responsible for pulling air from the condenser coils present over the compressor. Hence, when it fails to draw the air, the compressor faces overheating leading to poor or no cooling. 

2. Evaporator Fan Motor 

If the condenser fan seems to be working fine, the next part you should check is the evaporator fan and its motor. Like the previous point, if the fan fails to spin freely, doesn’t work, or gives out a weird sound, it might be better to replace the motor. Remember to always use a multimeter to be sure that the problem is present in the motor. 

The evaporator fan draws in air from the evaporator coils and circulates it throughout the fridge. In case the fan stops, the cool air will fail to be circulated, and your fridge won’t cool properly. 

3. Condenser Coils

One of the common mistakes people make is that they forget to clean the coils of their fridges. This can restrict the proper functioning of the coils, which may reduce the intensity of cooling. That’s because the buildup of dirt restricts the coils from dissipating the excess heat produced by your fridge.

So, check the condenser coils for any accumulation of dirt or debris, and clean them for the fridge to cool properly. We suggest cleaning the dirty condenser coils of your Frigidaire refrigerator at least once a year to maintain optimal cooling. 

4. Thermistor

The thermistor is the part of your fridge that’s responsible for maintaining the proper temperature. If, for some reason, the thermistor of your fridge gets damaged, there might be sudden temperature fluctuations. So, when all the other parts seem to perform regularly, check the thermistor with a multimeter for proper continuity. And replace it with a new one when there’s no response for reinstating proper refrigerator temperature management. 

5. Start Relay And Start Capacitor

Without proper power, your fridge wouldn’t be able to control its temperature. That’s why if your fridge stops cooling, check the start relay and the start capacitor to ensure that the parts aren’t damaged. 

The start relay supplies power to the compressor, so if you inspect it with a multimeter and fail to get a reading, change it to reinstate cooling. On the other hand, the start capacitor is responsible for providing the compressor with a boost of power for an efficient start. 

Similar to the start relay, check the capacitor with a multimeter for continuity and replace it with a new one if you don’t get a favorable reading. 

6. Temperature Control Thermostat

A part that’s often overlooked by homeowners while fixing their fridges is the thermostat. You should locate the thermostat in your fridge and turn it to the lowest setting. If you hear a click, then the thermostat is working fine. In case the click isn’t there, take a multimeter and check the thermostat for continuity. Replace it if you fail to get a reading. 

7. Control Board

We agree that diagnosing control boards can be tricky, but a faulty one may disrupt the proper amount of cooling in your fridge. Hence, after checking the other parts, make sure to pay enough attention to the control board, which might get damaged due to excessive moisture or heat. 

Like in the case of other components, check the control board for continuity to ensure it’s working properly. You won’t be able to get a reading from a damaged control board and will need to get it replaced to have a fully-functioning fridge. So, it’s best to consult a certified Frigidaire technician before carrying out the replacement. 

What To Do If Your Frigidaire Refrigerator Isn’t Cooling Properly, But The Freezer Works Fine? 

The evaporator fan is the prime suspect for a fridge with a working freezer but a faulty refrigerator compartment. Without the evaporator fan working properly, your fridge wouldn’t be able to get the much-needed cold air. So, locate it and inspect the fan blades to see if they’re spinning freely. If not, then the next part to check would be the motor of the evaporator fan. 

You should use a multimeter to test the continuity of the motor and replace it if there’s no response. We would also recommend changing the motor in case it’s unusually noisy.

However, if the motor seems to work fine, the next thing to check would be the evaporator coils. When the defrost system is faulty, the evaporator coils of your fridge may develop a layer of ice, hindering the internal compartments from cooling properly. Unplug the fridge for a few hours to let the coils thaw, replug it, and the optimal temperature should be restored in a day.

What To Do If Your New Frigidaire Refrigerator Doesn’t Cool? 

Most people start to panic when they find that their newly bought Frigidaire refrigerator isn’t cooling. The easy solution for such a situation is to check whether the fridge is still in demo mode. You should simultaneously press the adjust freezer and ice-off buttons and hold them for three seconds to turn off the mode. 

Also, turn the thermostat down to the lowest setting and wait for the cooling to begin. If the cooling problem persists, unplug the fridge, wait for three to five minutes, and replug the fridge. This should get your fridge restarted, and the cooling should begin.

Remember that after starting up a new fridge, it might take 24-48 hours for the compartments to get to the optimal temperature. So, check if the temperature settings of your fridge are alright and wait for it to cool. In case it fails to cool down after a couple of days, contact Frigidaire customer care, and the brand will send a licensed technician to check your unit. 

How To Quickly Fix A Mini Frigidaire Refrigerator That’s Not Cooling? 

By far, one of the bestselling appliances from Frigidaire has been its mini-fridges. They look great and are perfect for small spaces or even dorm rooms. They do stand the test of time for most people and work without getting into many troubles. However, the mini-fridges may sometimes have refrigerator cooling problems, just like their full versions. Here are some steps you may use to fix the issues: 

1. Check The Start Relay 

One of the first parts to check in a mini-fridge is the start relay to make sure that its compressor isn’t compromised. You should get your multimeter, check the start relay for continuity, and replace it if there’s no response. 

2. Check The Temperature Settings

If the temperature in the surrounding area is too hot, the cooling performance of a fridge may go down. So, check the temperature settings of your mini-fridge and set it on the lowest to get better cooling. 

3. Check The Thermostat 

The thermostat is the dial inside the fridge that lets you change the temperature. Ideally, it should move counterclockwise or clockwise, letting you choose a favorable setting. But, if it’s stuck or doesn’t seem to change the temperature, you may need to replace the thermostat. 

4. Check The Compressor

Not many people complain about a faulty compressor in Frigidaire mini-fridges, but it can still happen. So, if the other components seem to be fine, check whether the compressor is working. Even though it’s possible to replace the compressor system, you might be better off buying a new mini-fridge as the service can be costly. 

5. Don’t Overstuff The Mini-Fridge 

We have all been guilty of loading too much food into our mini-fridges. This can put pressure on the cooling system leading to its underperformance. When left disorganized, the air vents of the fridge might get blocked and fail to let enough cold air get into the refrigerator compartment. So, leave space between the vents and the food to let the fridge maintain proper airflow. 

How To Reset A Frigidaire Refrigerator? 

Before we move on to tell you how to reset the fridge, note that it’s important to read the user’s manual provided by the appliance brand. Going through it will let you know everything about the fridge as well as its parts. These guides also contain troubleshooting information to fix common problems by yourself. 

If you have misplaced the manual, don’t worry, as you can download them from the internet using the model number of your Frigidaire fridge. You can even contact the customer care of Frigidaire for specific information related to your fridge and its features. 

Now, a simple fix to restore proper cooling in a fridge is to reset it. In the case of Frigidaire refrigerators, most don’t have a dedicated reset button. So, to perform the reset, you’ll need to unplug the fridge, wait for five minutes, and then replug it. This should reset your fridge and restart the cooling. 

In case this fails to work, you may perform a hard reset. The process is similar to the usual reset, but you’ll need to increase the wait time by 30-40 minutes before replugging the fridge. This should reset most of the settings, so you’ll set them up once again. 

Once the reset is over, the fridge can take 24 hours to reach optimal temperature, so avoid repeating the process or opening the door too many times. 

In some Frigidaire refrigerators, you’ll find the Power Cool and Power Freeze buttons. Pressing them simultaneously for a few seconds performs a complete reset and restores the original settings. Remember not to frequently perform a hard reset as it can take a toll on the compressor of the fridge.  

How To Reset The Defrost Timer?

At times, the cooling of your fridge might be hampered by the accumulation of frost on the damper or the evaporator coils. This might be caused by a faulty defrost timer that fails to keep up with proper defrost cycles. 

To fix the issue, locate the defrost timer, which is usually situated at the back or bottom of your fridge. Then, unscrew the top panel to uncover the defrost timer and turn it anticlockwise till the farthest setting. When the fan stops moving, reattach the top panel, and the defrost timer should start within half an hour. 

Final Words

That’s everything we had to tell you about ways to fix a Frigidaire refrigerator that’s not cooling. We hope that our tips will help you find what’s wrong with your fridge and fix the issues to restore normal cooling. 

Note that, at times, finding a fault in your fridge can become challenging, especially if you have no experience in dealing with home appliances. In such cases, do take help from a licensed professional to find proper solutions. 

Furthermore, don’t open any of its components if your Frigidaire fridge is still under warranty. It’s better to seek help from the brand, and they will send a technician to fix your fridge. 

Until next time, goodbye, and take care!

Similar Posts

Leave a Reply

Your email address will not be published.