GE Profile Refrigerator Ice Maker Problems French Door! (Fixed!)

Although GE Profile refrigerators are known for their high performance and premium quality, it is important to acknowledge that their ice makers may encounter some problems. Many customers have reported issues with the ice makers in GE Profile French door units.

Common problems include ice makers that fail to produce ice, noisy or slow ice makers, ice makers that won’t turn on or off, and ice makers that stop working after being reset. However, it is worth noting that most of these problems can be fixed by users themselves, demonstrating the overall quality of GE refrigerators.

To help you address these issues, I will provide a troubleshooting guide with probable causes and do-it-yourself (DIY) fixes for each of the six problems. By familiarizing yourself with these DIY fixes, you can avoid becoming one of the frustrated users experiencing ice maker problems with their GE Profile refrigerators.

Let’s begin exploring the troubleshooting guide to resolve these issues and restore the optimal functionality of your refrigerator’s ice maker.

Troubleshooting Guide

Problem	Possible Cause	Fix
1. Ice Maker Won’t Make Ice	– Ice maker or water supply is off	– Turn on the ice maker and water supply
	– Wrong freezer temperature	– Lower the freezer temperature to the appropriate setting
	– Blocked water filter or valve	– Replace the clogged water filter or valve
	– Faulty door switch	– Replace the faulty door switch
	– Inadequate water pressure	– Raise the water pressure to the recommended level
2. Noisy Ice Maker	– Insufficient water	– Ensure sufficient water supply to the ice maker
	– Water supply is off	– Turn on the water supply to the ice maker
	– Fridge is too close to the wall	– Move the refrigerator away from the wall to reduce noise
	– Pump blockage	– Unclog the drain pump to allow proper functioning
3. Slow Ice Maker	– Low water pressure	– Increase the water pressure to the recommended level
	– High freezer temperature	– Lower the freezer temperature to the appropriate setting
	– Frozen line	– Defrost the water line to restore water flow
	– Obstructed water filter	– Replace the clogged water filter
4. Ice Maker Runs Endlessly	– Sensor failure	– Inspect the sensor and replace it if found to be faulty
5. Ice Maker Won’t Turn On	– Ice maker not turned on	– Turn on the ice maker
	– ‘Child Lock’ or faulty ice maker	– Deactivate the ‘Child Lock’ function
		– Replace the ice maker if it is defective
6. Ice Maker Doesn’t Work	– Low water pressure	– Increase the water pressure to the recommended level
After Reset	– ‘Child Lock’	– Deactivate the ‘Child Lock’ function
	– Water line blockage	– Unblock the water line to ensure proper water flow
	– Wrong reset procedure	– Follow the correct reset procedure as specified

6 Common Problems

In this guide, we will address the 6 most common DIY-fixable issues with GE Profile French door ice makers:

GE Profile Ice Maker Won’t Make Any Ice 

If your high-end GE Profile refrigerator’s ice maker fails to produce ice, consider these potential causes:

• Check if the ice maker is turned on.
• Ensure the water supply is turned on, as the ice maker requires water.
• Verify that the freezer temperature is within the recommended range of 0 – 50°F.
• Inspect the water filter and valve for any blockages.
• Measure the water pressure and ensure it is at least 20 psi.
• Test the door switch for continuity using a multimeter.

Noisy GE Profile Ice Maker 

While some noise is expected during operation, excessively loud or knocking-like sounds may indicate the following issues:

• Insufficient water pressure, which can be resolved by checking the pressure gauge and ensuring it is at least 20 psi.
• Ensure the water supply valve is open.
• Adjust the refrigerator’s position to prevent it from vibrating against the wall.
• Check the pump for blockages and clean it if necessary.

Slow GE Profile Ice Maker 

If your GE Profile French door ice maker is producing ice at a slow pace, consider these potential causes:

• Verify that the water pressure is sufficient (at least 20 psi).
• Ensure the freezer temperature is set within the recommended range.
• Check for ice frosting in the water line and defrost if necessary.
• Replace a clogged water filter every six months to maintain proper water flow.

GE Profile Refrigerator French Door Ice Maker Runs Endlessly 

If your GE Profile ice maker keeps running without stopping, it may indicate a faulty sensor. Inspect the ice maker sensor for any faults and replace it if necessary.

GE Profile French Door Refrigerator Ice Maker Won’t Turn On 

If your ice maker fails to turn on, consider the following possibilities:

• Check if the ice maker is turned on.
• Ensure the “Child Lock” function is deactivated.
• If the ice maker still won’t turn on, it may be defective and require replacement.

To remove the ice maker for replacement, follow these steps:

• Unplug the GE Profile refrigerator.
• Remove the ice bucket and unscrew the cover above the ice maker.
• Disconnect the wires and remove the screw holding the ice maker.
• Lift the old ice maker and consult a fridge expert for examination or replacement.

GE Profile Refrigerator Ice Maker Doesn’t Work After Reset 

If your GE Profile ice maker fails to produce ice after a reset, consider these potential causes:

• Check the water pressure and ensure it is sufficient.
• Confirm that the “Child Lock” function is turned off.
• Inspect the water line for any blockages that may hinder ice production.
• Follow the correct reset procedure to ensure the ice maker functions properly.

In summary

These are the most common GE Profile French door ice maker problems that can often be troubleshooted independently, saving you time and money. However, if the issue is beyond your expertise, do not hesitate to seek assistance from a professional.