How to make fridge colder

How to make fridge colder

Is your fridge not cold enough? Don’t worry! We’ve got it covered. In this article, you’ll get to know about how to make your fridge colder. In addition, you’ll also learn about:

  • How to set the temperature of a refrigerator?
  • How to organize the fridge to keep it colder?
  • What mistakes should be avoided to keep the refrigerator colder?

In every fridge, there is a dial that controls the temperature. However, if your fridge isn’t getting colder, you should check factors like thermostat settings, air space, gasket seal, etc., which should be taken into consideration. 

Why is your fridge not getting cold?

It’s essential to consider various factors on why the fridge is not colder than it should be. Sometimes even a minor issue can halt the refrigerator from getting cold. You can check the factors below to know why the fridge is not getting colder:

  • It’s essential to place the fridge away from stoves, direct sunlight, hot air vents, and ovens. It will help the refrigerator to balance the heat. Keeping it close to the heat source will hinder the cooling process.
  • It would help if you also kept a gap between the fridge and the wall. The condenser coil should have proper air circulation that will help to keep the refrigerator cold. The space is vital to keep the cooling effect of the fridge intact. It would also be best to vacuum the condenser coil to get rid of debris and dust.
  • Another factor is to check the door seal. It’s vital to check that the door is sealed properly to avoid leaking heat. The leak of heat can cause the fridge to warm up internally.
  • When the refrigerator is overpacked, the air circulation gets harder. It will hinder the fridge from getting colder fast. If the fridge is over-packed, it will also slow down the cooling effect. You can learn how to organize the fridge for a better cooling effect.

Steps to make the fridge colder

The ideal temperature in a fridge is 40 degrees Fahrenheit or 4 degrees celsius. You’ll also know that in the refrigerator, there is a dial-up to control the temperature. However, if your fridge is still not getting cold, then you can check the methods below:

Checking power plug

Electricity is essential for any home appliance. It will prevent the food from getting cold. Your fridge cannot run the compressor if there is no power. Hence, checking the power plug is vital to see if it’s put correctly. You can press the plug properly because sometimes, an accidental tug or kick can pull the plug.

Setting the thermostat

Another silly or common mistake would be nudging the thermostat without knowing. When we take vegetables or other food products from the fridge, we press the thermostat by mistake. It causes the temperature of the refrigerator to fluctuate.

Sometimes it might be very high or at times low. So, if your fridge is not getting cold, don’t forget to check the thermostat.

Clearing the vents inside

If you want to keep the fridge colder, it’s vital to have proper air circulation. The air should get into the compartments, fans, and coils. These are the critical places where the air is needed to keep the fridge cold.

Therefore, find the vents in your fridge and freezer and see that no containers or boxes are blocking the way. It would be best to keep this area clear of all these for better circulation.

Cleaning the internal mechanism

A fridge relies heavily on coils, compressors, and fans for better cooling circulation. All these can halt the cooling process. Sometimes it can get soiled with everything under the refrigerator.

Therefore, it would be best to plug off the fridge for a while and dust off the dirt. When you clean off the dirty particles, it will boost the performance of the refrigerator. After dusting off, don’t forget to turn on the plug.

Inspecting the door gasket

Your fridge needs to be sealed off properly to avoid the warm air getting in. When the warm air enters inside, it affects the cooling process. The rubber door gasket of your fridge plays a vital role in sealing off the warm air to enter inside.

In addition, the gasket can get dirty or warped that can get dirty or moldy due to damage or excessive moisture. In case you see any signs of damage, then it would be best to replace it. You can also use a diluted bleach solution and wipe it off.

Creating air space 

Your fridge will tend to slow the cooling process when there is no proper airflow. Hence, it’s better to organize your fridge correctly. You shouldn’t put containers or food items near the vents as it will affect the cooling process. It would also be best to avoid overcrowding the fridge.

You can get rid of the food items that have expired or spoiled. Doing this will allow more space in the refrigerator resulting in better air circulation.

Checking the door switch

You should also check the switch of the fridge door. Some fridge tends to cool down if the door is not closed correctly. It reacts automatically. If the door of the refrigerator doesn’t function properly, it can affect the cooling process. So, make sure that the door switch is in good condition.

Defrosting regularly

Another way to keep the fridge cold is through defrosting. The frost gradually builds up over vents that will slow down the cooling. You must manually defrost them if you don’t have the feature in your fridge. And if you have the defroster feature, ensure that it’s utilized properly.

Conclusion

If you want your fridge to have an excellent cooling process, proper maintenance is vital. We often make the mistake of over-packing, blocking the vents and air space in the fridge.

All this leads to slowing the fridge from getting cold. In addition, if we don’t take care of the fridge timely, it will get spoiled sooner than the warranted time. Hence, proper care is essential.

Similar Posts