Don’t you think having a cooling problem with your Westinghouse fridge is troublesome? We bet you do!
Westinghouse fridges are well known for their premium designs and wide range of functionality. However, like all appliances, these are also prone to some defects with time.
One such problem is when the Westinghouse fridge doesn’t cool properly, leading to food spoilage. There can be several reasons that can cause your Westinghouse fridge to have cooling issues.
Keeping this in mind, we have put together this article to help you understand the causes of the cooling problem. You can also solve the issue by following the simple steps mentioned here.
So, without further ado, let’s move to the next section.
Why Is My Westinghouse Fridge Not Cooling Properly And How To Fix It?
Nowadays, most Westinghouse fridges are built in the same way; therefore, it is easier to identify and fix the problem since the components are similar in almost every fridge. Despite the similarity, some Westinghouse Fridge models may provide different functionality and utility.
Here is a list of components that can cause your Westinghouse fridge to cool inefficiently.
1. Condenser Fan Motor
One of the most important components of a Westinghouse fridge is the compressor fan motor since it brings out air from the condenser coils and releases it over the compressor. Doing so ensures proper and even cooling in your fridge. If the condenser fan motor is not working, then there will be no air circulation in the fridge, resulting in cooling issues.
Firstly, you should check the condenser fan blades and see if it is working by spinning the blades with your fingers. If it doesn’t spin properly, then there is a high chance of an obstacle or a foreign object blocking the condenser fan. Use a clean cloth to remove the obstacle and try to spin it again. If the problem continues to persist, then you will need to replace the condenser fan motor since the current one is defective.
2. Evaporator Fan Motor
Moving on, the evaporator fan motor is quite similar to the condenser fan motor; however, it draws air from the evaporator and circulates the cool air to the entire fridge. On that note, some Westinghouse models may have more than one evaporator fan motor, especially if the fridge compartment is big. Generally, the evaporator fan motor is located in the freezer compartment, which makes it easy to access and work on it.
If the evaporator fan motor is defective, it will not cool the fridge properly, and you will either need to fix or replace it. Firstly, test the fan blades by spinning the blades with your hand. If it doesn’t spin, it will need some cleaning since dirt might be obstructing the blades from moving.
Apart from this, the motor can be faulty due to some defect. Use a multimeter device to test it. The evaporator fan motor can be replaced since the part is easily available on the market.
3. Condenser Coils
Another component that might cause your fridge to have a cooling issue is the condenser coils which are responsible for dissipating heat from the fridge. Usually, the coils become ineffective whenever dust and debris start to build up around them, and this prevents the coils from dissipating heat efficiently.
The longer it takes the condenser coil to dissipate heat, the more time the fridge will take to cool down. Therefore, you should clean the coils whenever you notice any dirt or debris accumulation.
4. Temperature Control Board
The temperature control board is the most important component of the fridge since it provides the required voltage for the fan motors and compressor. A defective temperature control board will not send any voltage to the other components, and this will prevent the fridge from cooling.
Nevertheless, you should check the other components first before replacing the main temperature control board since the problem might be misdiagnosed. If you notice no fault in the fan motors or the compressor, then you should hire an electrician and get the temperature control board checked.
5. Start Relay And Start Capacitor
The start relay is like a kick start that gives the compressor the required signal to function optimally. A defective start relay will fail to run the compressor since it doesn’t have the required energy to keep it stable. So, you should change the start relay if it is defective.
On the other hand, the start capacitor is responsible for enhancing the power of the compressor during the initial start-up. Without this extra boost from the start capacitor, the compressor will fail to cool the fridge properly.
6. Temperature Control Thermostat
Just like the temperature control board, the temperature control thermostat also sends voltage to the other components of the fridge as well as regulates the internal temperature within.
If your Westinghouse fridge is not cooling properly, try rotating the thermostat from the lowest temperature setting to the highest and see if it functions normally. If it doesn’t change the temperature, then you will need to replace the thermostat switch since it is defective.
Next on our list is the compressor which pumps the compressed refrigerant to the entire fridge through the condenser and evaporator coils. If the compressor doesn’t work properly, there will be less refrigerant pumped into the fridge, and this will reduce the overall cold air circulation.
However, most Westinghouse fridge compressors come with a five to six-year warranty. So, the chance of it being defective is less. Other Westinghouse fridge models may offer a ten-year warranty on the compressors. So, you should check the other components first before diagnosing your compressor as defective.
If you notice an open circuit in your compressor, then it will require a replacement since it is defective. You can get in touch with a technician to get the compressor replaced.
8. Lack Of Refrigerant
A refrigerant is a mixture of components such as hydrogen, ammonia, and water that work together to keep the fridge cool from within. In the beginning, the amount of refrigerant present within the compressor is sufficient to get the job done without any difficulty.
As time passes by, the refrigerant slowly starts to fade away, and this causes the fridge to have issues while cooling. Although this might seem like a big problem, you can refill the refrigerant, and the fridge will work normally. On that note, we suggest hiring a professional to refill your fridge with refrigerant since the chemicals are harmful and require extra precautions while handling them.
Frequently Asked Questions
What To Do When You Hear Your Westinghouse Fridge Running But Not Cooling?
When inspecting your fridge, if you notice that the refrigerator is running, but it is still giving cooling issues, then there is a problem with the compressor. Most likely, there is a faulty connection between the compressor and evaporator coils.
Therefore, the fridge will not cool even though the appliance is running.
However, you can solve this problem by fixing the wiring connection between the compressor and the evaporator coils.
How Can I Reset My Westinghouse Fridge When It Is Not Cooling?
Sometimes, the best way to fix the cooling issue of your Westinghouse Fridge is by resetting it. Turn off the main power and remove the plug before attaching it back to the socket.
After doing this, turn on the power and adjust the thermostat temperature and let the appliance do its job. Don’t forget to give your fridge some time to reset itself normally.
Westinghouse fridge not cooling but freezer working
If your Westinghouse fridge is not cooling but the freezer is working, the issue could be caused by a malfunctioning compressor or a blocked air flow. To troubleshoot, first check that the compressor is running properly.
If it’s not, it may need to be replaced. Next, check that the air flow vents are not blocked by dust or debris. Clean them out if they are. If these steps don’t solve the problem, it may be best to call a professional for further diagnosis and repair.
Another possible reason for the fridge not cooling is a malfunctioning thermostat. The thermostat controls the temperature inside the refrigerator and if it’s not working properly, it can cause the fridge to stop cooling. To check if this is the issue, locate the thermostat inside the fridge and test it with a multimeter.
If it’s not working, it will need to be replaced. If you’re not comfortable with these troubleshooting steps, it’s best to call a professional for help.
Finally, we have reached the end of our comprehensive guide on how to fix your Westinghouse fridge cooling issue. We genuinely hope that you will be able to fix your fridge like a pro now.
Based on our experiences, most of these issues occur when you don’t use your fridge properly. However, this can be avoided if you take extra precautions. For instance, never leave the fridge door open for a long time. This will allow humid air to enter the fridge and disrupt the internal temperature. Apart from this, you should make sure that you don’t overstock your fridge with various food items.
Every fridge is built to contain a certain quantity of food; hence overstocking can prolong the time it requires to cool the entire compartment.
With that, we shall sign off. See you next time!