Fisher And Paykel Fridge Is Not Cooling (Quick Fix)

Fisher and Paykel fridges are known for combining style and utility- a feature that sets them apart from other brands.

However, it’d be wrong to assume that they won’t encounter any issues like any other electrical appliance in your home. And one of the most common problems owners face with both an old or new fridge is inadequate cooling. But in most cases, this isn’t caused by any major technical fault.

So, what’s the reason? Read on to know!

Fisher And Paykel Fridge Is Not Cooling – Quick Fix

Many people get intimidated by the ceased cooling mechanism of their fridges, relating it to a big (and costly) issue. But this may not always be the case, and you can easily get the unit to start cooling again by making a few simple changes, like:

1. Resetting The Internal Temperature 

You may have accidentally turned the temperature control knob (or thermostat) to the right to increase the temperature or increased it intentionally when there were fewer food items inside. Both these instances can account for the wrong temperature level, thereby slowing down or preventing the cooling mechanism of your fridge, especially when the outside temperature is high.

So, one of the first things you can do is to check the current temperature setting of the unit. If it’s too high, reduce it to the lowest temperature or a couple of stops before that and observe the cooling for 24 hours. 

In case you don’t notice any change after the said time, then it’s a different issue that needs to be dealt with.

Related: How To Reset Fisher And Paykel Refrigerator

2. Reorganizing Food Items

If there are excessive food items in your fridge, then there’s a high chance that you have stacked them in a way that blocks the air vents. This can reduce or stop the circulation of cool air in the fridge to prevent it from cooling properly.

Switch off the main power supply of the unit and declutter it so that the air vents are free from any obstructions. Then, switch on the power and check the fridge after a couple of hours to see if it has resumed cooling.

3. Defrosting The Evaporator Coils

If the refrigerator has been running at a low temperature for a long time, then the evaporator coils may have accumulated frost. And too much frost deposition can prevent the unit from cooling, especially if you don’t perform a manual defrost at the earliest.

Firstly, remove any perishable food items from the fridge, turn off its power supply, and remove the plug from the socket. Next, spread some old towels or rags on the floor below the fridge and wait for a couple of hours or until all the frost has melted. 

Finally, turn on the power supply and let it run for about 30 minutes to an hour to check if the cooling has resumed properly. And we suggest doing this before restocking the fridge.

4. Replacing The Door Seals

The door seals of your Fisher and Paykel fridge wear out over time, preventing the doors from closing properly. As a result, cold air escapes from the fridge much faster than usual, making the cooling mechanism practically useless.

Not only that, but it may also increase the internal temperature by allowing the entry of “warm air” from outside. Hence, it’s generally recommended to get the seals replaced if the unit has crossed the 5-year landmark if there are no visible signs of damage. 

Another thing to note here is that gunk and oil deposition on the seals can make them wear out much before time. That’s why it’s important to clean the fridge regularly and store everything in air-tight containers so there are no unnecessary leaks or runoffs.

5. Replacing The Defective Compressor

Older fridges that undergo heavy-duty use put excessive strain on the compressor, thereby “killing it” over time. So, if none of the above suggestions help your fridge cool itself again, it may be a good idea to check the compressor.

The easiest way to determine if the compressor is running or not is to listen for a humming sound, which switches on and off at regular intervals. If the noise is consistent or there’s no sound at all, it’s time to get a replacement. And we’d strongly recommend seeking professional help for this.

A pro tip: try not to overload the fridge or change the temperature too frequently to keep the compressor running like new for years to come. 

6. Repairing Or Replacing The Fan Components

Dirty or worn-out fan components can keep your fridge from cooling properly. For instance, if the fan blades have accumulated dirt or become old, then the airflow inside the unit will get affected. Besides, the fan motors may work too hard to circulate the cold air and burn out before time.

Check the instruction manual to identify the exact position of the fan and learn how to dismantle it. Once out, clean the blades with a cloth or sponge and put them back in. But an easy solution would be to call a technician to understand if the components need to be cleaned or replaced. 

What To Do If Your Fridge Is Not Cooling And Beeping At The Same Time – Quick Fix 

Is your Paykel fridge beeping suddenly? Then it’s probably due to insufficient cooling. 

Like most refrigerators on the market today, the Fisher and Paykel refrigerators are meant to function silently. But a beeping sound along with partially or completely ceased cooling can indicate a problem that needs immediate attention. So, here are some suggestions that may help you resolve this issue without much hassle: 

1. Reposting The Fridge

While all refrigerators should be leveled to help them cool optimally, the fridges from this brand are equipped with “alarms” that go off if there’s a tilt at the base. So, if you’ve recently shifted your fridge to a different room with an uneven floor, then it will start beeping in no time.

To prevent this, get hold of a level, place it on top of the unit, and observe the bubble in the liquid vial. In an ideal case, the bubble should be right at the center of the vial.

But if it’s not, keep adjusting the legs of the fridge in clockwise and anti-clockwise directions until the bubble sits at the center. Do this carefully, as over-adjusting the legs will disrupt the balance of the unit again, making the process unnecessarily time-consuming.

2. Checking The Door Seals

Your Fisher and Paykel fridge will beep continually if there’s refrigerant leaking from worn-out or peeled door seals. So, perform a thorough manual check of the seals to ensure they are not damaged even if the door opens and closes smoothly.

3. Replacing The Main Board

A faulty main board can also make the alarm on your Fisher and Paykel fridge go off. If you’ve already checked the placement and seals of the unit, but the beeping hasn’t stopped, then we’d suggest using a multimeter to check the continuity of the board. 

However, we’d recommend getting professional help to fix or replace it in case of any faults.

What To Do If The Freezer Isn’t Cooling?

The freezer compartment of your Fisher and Paykel refrigerator is also prone to cooling issues. But the good news is that you can employ some easy checks to fix them, even if the freezer light is on. 

Firstly, check the condenser and evaporator fans to ensure that the blades aren’t dirty, worn out, or obstructed. If this doesn’t work, move on to the condenser coils and ensure that they aren’t covered in frost or dirt. In case they are frosted, switch off the unit and let it defrost for a couple of hours. Otherwise, gently clean the coils and turn the power back on.

Another reason behind the freezer not cooling properly is a malfunctioning relay (the part which supplies power to the compressor). Remove it from the compressor and shake it to check if there’s any rattling sound or a burnt smell. Either of these instances will require the relay to be replaced.

Whether you’re checking the components or cleaning them, always turn off the power and remove the main plug from its socket to prevent the risk of electric shocks. And put on a pair of rubber gloves if possible as an additional safety precaution.

Final Words

One of the best ways to keep your fridge running optimally for years to come is to take care of its maintenance. So, we recommend cleaning it properly, regularly, and keeping the vents free from obstructions. 

Aside from that, you may want to consider getting it serviced by professionals. This will help nip anything (that may become a serious issue over time) in the bud. See you again!

Similar Posts